INRODUCING:-

KANAMODEL EXPRESS kits are designed in the same way as our regular kits but are of smaller buildings. All include laser cut Mt Albert Scale Lumber siding, colour coded scale stripwood, cast windows and doors, etc., plus all feature our "WORKING WITH WOOD" pamphlet. Paint, cement and an X-acto knife are all that is needed to construct these realistic kits. With our complete instructions including photographs they are easy enough to build for the absolute beginner, but realistic enough for the advanced modeller, and they are ideal for adding to larger industrial scenes. They are at your dealers in the yellow pegboard package. Photos are of the actual models.

CLICK ON THE MODEL DESCRIPTION BELOW OR SCROLL DOWN TO SEE SPECIFICATIONS OF EACH KIT

A PAIR OF "ONE HOLER" PRIVIES

Every HO Scale figure needs one of these once in a while and at this economical price every layout can have several. They are complete with everything you need except an Eatons catalogue.  One privy has a cast shingle roof while the other has a tar & gravel one. Both have cast simulated concrete bases. Footprint about 1" sq. ea.

KIT #4001. RETAIL...$ 11.00

===================================================================================

A ONE CAR GARAGE.

We know that nearly no-one has a one car garage these days, but in the transition period and before, one car garages were the norm. This model doesn't need to be by a house - it can be used in an industrial setting, a farm outbuilding or anywhere a vehicle, tractor or whatever needs to be stored. Cast shingle roof sections make this an easy to build foreground model to be proud of. The footprint is 2" x 3"

KIT # 4002. RETAIL....$ 14.00 

====================================================================================

SPEEDER / STORAGE SHED

This attractive little shed with its attached lean to has a precast post assembly along with pre cast rafters making it an easy to build attention getter anywhere on your layout. It was designed for speeders and material is supplied to make a speeder setoff,  but it can be used for storage on a farm or for parking the bosses car in an industrial setting. The tar & gravel roof is a nice contrast to the scribed siding. Footprint is about 2 1/2" x 2 1/2".

KIT # 4003. RETAIL....$ 15.00

====================================================================================

YARD OFFICE

Yard offices are used in industrial complexes and house such things as the watchman, a staff lunchroom and restroom, foreman's office, etc. They can be found in such locations as lumber yards and camps, mines, manufacturing facilities, etc. The prototype for our kit is located in Surrey, British Columbia in a lumber reloading operation. This is where lumber is taken from trucks which bring it from the mills in the woods, and place it on railroad cars for shipment all over North America..This kit features laser cut siding with colour coded stripwood, a cast simulated concrete base, molded windows, doors and chimney plus a cast shingled roof for quick but realistic assembly. Footprint is 2.5" x 3"

KIT # 4004. RETAIL....$ 14.00    

=================================================================================

PASSENGER SHELTER

Passenger shelters were a common site in North America everywhere there were commuter trains, or interurban lines. Our prototype was used by the British Columbia Electric Railway Company until the mid 1950's when the private company was taken over by the government. This company ran interurban lines throughout the Fraser Valley of BC from Vancouver to Chilliwack a distance of about 75 miles. Besides the usual features in all EXPRESS kits our model features a cast simulated wood base, cast roof supports and self adhesive rolled roofing. Its footprint is 3" wide x 1.5" deep.

KIT # 4005. RETAIL....$ 8.95

===================================================================================

THE COMPANY HOUSE

Company houses were first used to keep the work force close to the  site so they would not wind up in the town lock-up after a night in the local saloon. Usually there were several types of houses - one for married men with no children, another for married couples with children, a more elaborate one for foremen, etc.  The model we have chosen was one used for married couples with no family and was in use into the 1960's in Fraser Mills, British Columbia. They were first built by the Canada Western Lumber Company in the late 1800's. Our model has the usual EXPRESS features but also has a simulated cast concrete base, cast shingle roof, molded windows, doors, etc. The footprint is 3" x 4"

KIT # 4006. RETAIL....$ 20.00

===================================================================================

TWO CAR GARAGE

This garage was typical of those constructed just after world war II when North American families increasingly became two car families. It would be common to see this type of garage with ranch style houses and older type houses. They were gradually replaced in new construction with built in garages and car ports.  Besides the regular EXPRESS kit features the kit included cast shingle roofing, cast windows and a cast roll up door. The footprint is 3" x 3"

KIT #4007. RETAIL....$ 18.00  

================================================================================

"TWO HOLER"  PRIVY

This model is of a common "his and hers" outhouse found near  commercial buildings and  anywhere people congregated in larger numbers. They were common near smaller passenger stations on both main and branch lines. In fact some smaller stations on branch lines in Canada actually still used these buildings until they were dismantled with the stations in the early 1960's. Along with the features in all EXPRESS kits we have included a cast simulated concrete base cast windows and doors and an authentic baffle. The footprint is 1.5" x 2".

KIT # 4008. RETAIL....$ 12.00

=======================================================================================================

CANADIAN PACIFIC CROSSING SHANTY

The prototype for this building was located on Vancouver Island in British Columbia, on the Esquimalt and Nanaimo division of the Canadian Pacific. It protected the main line near Chemanius where it was crossed by a logging railroad eventually owned by Crown Zellerbach. It is typical of small crossing shanties found all over North America. It has windows on all 4 sides for visibility and is raised a couple of  feet due to the fact as it was to the side of the track and thus sitting below rail height. A cast shingle roof and steps are in addition to the EXPRESS features.The footprint is 1.5" x 1.25" 

KIT #4009. RETAIL....$ 11.00

=================================================================================

CANADIAN PACIFIC PORTABLE STATION

The prototype for this kit was a small station used in outlying areas where there were only occasional passengers. In the early to mid 20th century before everyone owned a car and road were very poor or non existant, people often took trains to outlying lakes etc for weekend excursions. These types of stations being portable and able to fit on a flat car were often used in these locations. A cast shingled roof and concrete base are included along with the usual EXPRESS kit features such as cast windows and doors, laser cut walls, easy to follow instructions, etc. The footprint is 1.5" x 2.75".

KIT # 4010. RETAIL. $ 1500

===================================================================================

CANADIAN NATIONAL M.O.W. SHED #10

This maintenance of way shed could be found along most of the Canadian National lines in Canada but is typical of those found all over North America. The prototype for this kit was located near Vernon, British Columbia, Canada. These buildings were found every few miles during the age of steam, and early diesel years. and many still stand to-day although in very decrepit condition. The footprint is 4" x 2.25".

KIT # 4011. RETAIL $ 19.00

====================================================================================

CANADIAN PACIFIC TWO MAN BUNKHOUSE

These two man bunkhouses were very temporary structures usually used near construction sites or where temporary flagmen or watchmen were needed. They were very portable and were not intended to be used for long term accommodations.  Our kit sits on log skids as did many of the prototypes as this made them more portable. Their size was such that they could be easily lifted by crane and transported by flat car the next construction  site. This kit could also find a home on a logging or mine site, along with many other uses. The footprint for this kit is 3" x 1.75".

KIT # 4012. RETAIL $ 14.00

=====================================================================================

CANADIAN PACIFIC STANDARD #2 COAL AND OIL SHED

This seldom modelled but very common structure was found in any number of locations on the railroad. It housed a small amount of coal used for the caboose stoves and a section containing coal oil (kerosene) for the lamps used by the train crew and for switch signals. They were always found where cabooses were stored and often near stations, and way buildings where small amounts of coal for the stoves and a spare supply of coal oil was needed.  Surprisingly these little buildings were in used well into the age of the diesel. The footprint is 3" x 1.75"

KIT # 4013. RETAIL $ 15.00 

================================================================================

CANADIAN PACIFIC #2 STANDARD TOOL HOUSE 

This is a smaller tool house than the one included in our lineside building kit. It was commonly used in branchline out of the way locations that did not require the large version. The class one railroads had hundreds of these buildings scattered throughout the system. The footprint is 2.25" x  1.5"

KIT # 4014. RETAIL $ 12.00

THIS KIT IS CURRENTLY OUT OF STOCK. RE RUN DUE MID MARCH 2014

================================================================================

GRAND TRUNK/CNR BUNKHOUSE

Bunkhouses were used all over the railroads where crews had to be housed for their booked rest periods. This one is a four or six  man version but it could be used in logging camps, mines etc. The foot print is 1.5" x 5" 

KIT # 4015. RETAIL $ 18.00

================================================================================

GRAND TRUNK/ CNR SPEEDER SHED

Every layout needs these in large numbers. They were found on every railroad large or small every few miles This one is a GT/CNR  design but is very common. The footrprint is  1.5" x 2".

KIT # 4016. RETAIL $ 11.00

=================================================================================

CATTLE LOADING RAMP

The is the ramp that is included with out kit # 1058 (CPR 3 car stockyard).  They were found on ranches for loading cattle and other livestock into cattle tucks etc. In fact many larger ranches had several. We l include optional wing fences (as shown in the model photograph below) which made herding easier. 

KIT # 4017. RETAIL $ 13.00

====================================================================================

SMALL OFFICE

This addition to our EXPRESS kit series is the office in the above coal shed kit. It is an easy 1 evening project and can be used in any number of places to super detail a scene. Laser cut wood, self adhesive roofing and cast windows, door and base are included. The footprint is 3" x 1.5". 

KIT # 4018  RETAIL PRICE $ 15.00

=======================================================================================

CANADIAN PACIFIC SIGNALMAN'S SHED

This will be kit #19 in our "express" series of kits. This is the tool house used by signal maintainers and is different than the other lineside buildings in our range of kits. It has three specially cast windows, a regular door, a double door, a chimney and a cast shingle roof for easy assembly Footprint is 2" x 2.75".

KIT # 4019 RETAIL PRICE $ 12.00

==================================================================================

 

TO VIEW THE SPECIFICATIONS AND DETAILS OF OUR PRODUCTS CLICK ON THE LINKS BELOW TO GO TO THE  PAGE

 email: info@kanamodel.com

Box 57585-1031 Brunette Ave.,Coquitlam,BC,Canada,V3K6S8

COPYRIGHT 2015 KANAMODEL PRODUCTS INC. ALL RIGHTS RESERVED